What will happen when your bathtub gets dirty? Obviously, it’s hard to keep yourself clean even after a bath session. For hygiene reasons, you need to know how to clean bathtub properly and effectively.
Where can I start? No matter which cleaning methods you want to apply, preparing tools and materials are a good beginning. It helps you perform a smooth, hassle-free cleaning with a satisfying result.
Table of Contents
Cleaning Bathtubs Do’s and Dont’s
Cleaning bathtub seems easy as you only need to scrub the soap scum and mold vigorously. It’s not entirely true that cleaning the bathtub is about removing stains and maintaining the tub. For the best result, be sure to follow these rules.
- Use soft tools such as a sponge or microfiber cloth.
- If you use commercial cleaners, always stick to the instructions.
- Clean before the molds and stains build up.
- Do not use abrasive cleaners or tools as it can damage the tub surfaces.
- Don’t mix commercial cleaners, especially ones containing chlorine and ammonia as it potentially produces toxic fumes.
- Don’t scrub too hard even over stubborn stains. Instead, use more amount of cleaner.
How To Clean Bathtub (with chemicals)
Chemicals help get rid of hard water stains or black mold quickly and easily. Cleaning the tub with chemicals isn’t always money-wasting, as cheap chemicals can be found in your kitchen. Luckily, they work as great as pricey commercial cleaners!
Every thrift homeowner knows how useful baking soda can be. This product is effective in cleaning bathtubs as it can loosen mold and remove stains. Not only does it work for the tub, but it also works for the faucet and tile.
Follow the steps to clean the tub using baking soda:
- Create a baking soda paste by mixing two tablespoons of baking soda and a small amount of water.
- Apply the paste to the stains and scrub.
- Rinse thoroughly.
Clean your tub with vinegar and figure out how amazing the result can be! This kitchen product is acidic, so it can disinfect the bathtub, aside from cleaning it. More importantly, vinegar is safe for everyone.
Try these few steps to get rid of stains with vinegar:
- In a spray bottle, dilute a cup of vinegar in a cup of water, mix thoroughly.
- Spray over the stains or desired areas and scrub using a sponge.
- Rinse thoroughly with water.
This method may cause an unpleasant smell in the bathroom. If you’re disturbed by the odor, use a tablespoon of lemon juice to neutralize the scent.
You can always wash the tub with bleach. This chemical is powerful to loosen stains and remove molds from the tub surface. Pay attention to this instruction.
- Wet the tub with water.
- Make a bleach solution by mixing a half cup of bleach with 1 gallon of water.
- Use a sponge to wipe the surface. Let sit for about 5 minutes.
- Use a fresh sponge and dip in cold, clean water. Wipe the tub with a circular motion.
- Dry with a soft towel.
This chemical can work miraculously to clean your tubs, showers, or faucets. It can be found in many commercial cleaning products and is easily available at grocery stores. How to clean bathtub with borax?
Simply follow the steps below:
- Pour some borax to a damp cloth and scrub on the tubs.
- Rinse thoroughly.
This product can also be used to clean tile and tile grout. Make a borax paste and apply it to the desired area.
Bring back the brilliance of your tub with hydrogen peroxide. This chemical is effective to remove red or black stains and make your tub shine again like new. Here is how to do the cleaning procedure:
- Make a paste by mixing hydrogen peroxide and baking soda.
- Apply the paste to the stained area. Let sit for about 30 minutes.
- Scrub with a sponge.
- Rinse with warm water.
How To Clean Bathtub Naturally (Without Chemicals)
Using chemicals to clean the tub may cause bad effects, either for health or tub condition. Worry not, you can always choose natural methods to get rid of dirty bathtubs. Simply prepare grapefruit and salt and do the following steps.
- Half the grapefruit and sprinkle the salt over the tub.
- Use a half of grapefruit to scrub the surface while occasionally squeeze it. The acidic juice help loosen the stains.
- Get another half and repeat the procedure.
- Rinse thoroughly.
How to Clean Acrylic Bathtubs vs. Fiberglass Bathtubs vs. Plastic Bathtubs
There’s a wide array of choices when it comes to bathtub materials, among which are acrylic, fiberglass, and plastic. Each material needs different treatment and maintenance, especially during a cleaning project.
Acrylic and fiberglass are vulnerable to scratches. But fiberglass is much easier to clean than acrylic, especially when removing hard water stains. While fiberglass can accept baking soda and more various cleaners, you need to be picky when choosing acrylic cleaners.
Meanwhile, plastic is the easiest to maintain. When it gets mildew or calcium buildup, simply use chlorine bleach, and your tub will look good as new. However, vigorous scrubbing can also leave scratches on plastic surfaces.
Bathtub Cleaning Tips
Cleaning the tub is easy, but it can be trickier than you thought. As the wrong cleaning procedure can damage the tub, you might need to consider cleaning tips.
- Know the tub material
Before cleaning, it’s necessary to know what material your tub is made of. Knowing the material helps you decide the right cleaning solution and method.
- Do regular cleaning
Regular cleaning makes your job easier. The stains and molds are much easier to clean before they start to build up.
- Don’t leave shampoo or soap in the bath.
Leaving soap or shampoo in the bath can cause disturbing scum. It means you need to schedule more cleaning to keep the tub shiny.
- Avoid using an abrasive cleaner.
The abrasive cleaner is not recommended for any tub materials, especially acrylic and fiberglass. This cleaner contains harsh chemicals that can damage the tub surface.
A dirty bathtub is a real headache. Knowing how to clean bathtub properly helps you keep the overall bathroom looks clean and shiny. Choose your favorite method and clean your tub regularly!